/etc/init.d/hpe-ams restart chkconfig hpe-ams on
If you need help tailoring this to your exact hardware setup, let me know:
This is the most critical time-sensitive factor. vSphere 7.x reached its End of General Support (End of Service) on October 2, 2025 . Customers running vSphere 7.x after this date will not be able to receive new product support, security patches, or bug fixes from Broadcom. If your environment requires official support or security compliance, you must begin planning your migration to vSphere 8.x immediately. The HPE Custom Images for ESXi 8.0 are already mature and widely supported across HPE's current hardware portfolio.
Historically, attempting to install a generic VMware ISO on an HPE ProLiant server often resulted in failure—typically presenting a "No Network Adapters Found" error during installation or missing storage controller drivers. To mitigate this, HPE releases a "Custom Image" in collaboration with VMware. This image is pre-loaded with the scsi-hpvsa , net-igb , i40en , and other vendor-specific drivers.
Works with the HPE Service Pack for ProLiant (SPP) to ensure driver-firmware compatibility. /etc/init
On the left-hand primary navigation column, click on . In the centralized top-right search box, input VMware vSphere and select it from the filtered menu results. Step 4: Choose Entitlements and Major Release Version
Not officially supported on ESXi 7.0. Attempting installation may result in missing storage drivers or blocked installations. Step 2: Navigate the Broadcom Support Portal
Ensure the ISO version aligns with the required update, such as the February 2025 release for ProLiant.
The generic baseline installer distributed by VMware lacks specific drivers for proprietary HPE hardware components. Relying on a standard vanilla ISO often results in installer freezes, unrecognized storage arrays, or catastrophic network failures post-deployment. If your environment requires official support or security
Use the inline search box to filter by typing HPE . Locate the entry titled HPE Custom Image for ESXi 7.0 Update 3 .
HPE does not always release a new customized ISO for every single VMware patch. If you need a specific, newer patch level, you can create your own custom ESXi image using VMware vLCM or PowerCLI by importing the HPE driver bundles. 2. Use vCenter Life Cycle Manager (vLCM)
For a standard , follow this step-by-step guide for consistency:
Select Upgrade ESXi, preserve VMFS datastore to keep your existing virtual machines intact. To mitigate this, HPE releases a "Custom Image"
The standard VMware ESXi image provides the base operating system, but it lacks the proprietary drivers and management agents specifically tuned for HPE hardware.
Following Broadcom's acquisition of VMware, the old VMware Customer Connect platform has been decommissioned. All authentic, certified original equipment manufacturer (OEM) images are now hosted within the unified Broadcom support eco-system.
: Works seamlessly with HPE's built-in server deployment tools. Implementation and Upgrade Workflow
Standard VMware ESXi vanilla installations lack the built-in storage controller, network interface card (NIC), and hardware monitoring definitions required for HPE ProLiant, Synergy, or Superdome servers. Utilizing a vanilla image often leads to unmapped network adapters, missing RAID logical volumes, or missing temperature and power analytics.
Packages specific vSphere Installation Bundles (VIBs) required to pass error logs and hardware diagnostics to HPE support engineers. Step-by-Step Navigation: Where to Download the Workable ISO