Dvb Select Type Error Samsung Tv Jun 2026

His heart hammered against his ribs, mimicking the rain outside. He navigated to Option .

A loose coax cable can prevent the TV from detecting the signal, triggering configuration errors. Unplug the coaxial cable from the "Antel In" or "Cable In" port on the back of the TV. Check the center pin to ensure it is straight, then screw it back in tightly. Change the Source Input

He punched in the code: Info, Settings, Mute, Power.

While the TV is on, hold the Power button on your remote until the TV turns off and then back on again (usually about 10 seconds).

Many users see "DVB-C" and assume "C" stands for "Country" or "Common." It does not. If you select DVB-C with a standard antenna, your TV will try to decode encrypted cable frequencies. It will fail, find zero channels, and potentially lock the tuner into "Cable Mode."

The "DVB Select Type" error on Samsung TVs typically occurs when the television's internal digital tuner encounters a mismatch between the broadcast signal type (e.g., DVB-T, DVB-C, or DVB-S) and the user's selected input or hardware configuration

: Use this if your TV is connected directly to a Satellite Dish .

How to Reset or Restart a Samsung TV (Soft & Factory Reset Guide)

Before fixing the problem, it's helpful to understand what "DVB" means. stands for Digital Video Broadcasting , the standard used to deliver digital television signals. Your Samsung TV has a built-in tuner (often a "triple tuner") that can receive programs through three different broadcasting methods:

Checked the antenna/cable connections to make sure they're tight.

Look for sharp bends, cuts, or frayed connectors along the cable line.

Go to Settings > Support > Software Update > Update Now to ensure a bug isn't causing the error.