In normal flashing circumstances, you do not need to re-partition your storage. If you manually checked this option, turning it off usually solves the problem. Odin NAND Erase and Re-Partition Guide | PDF - Scribd
Flashing a firmware version intended for a different model or regional carrier variant.
| Symptom | Likely Cause | Confidence | |---------|--------------|------------| | Error appears immediately after “Set PIT file” | Missing or corrupt PIT in firmware | High | | Error appears after 10–20 seconds | NAND bad block in partition table | Medium | | Error only with Android 11+ firmware | Dynamic partitions ( super.img ) conflict | High | | Device previously had custom ROM (LineageOS / TWRP) | Modified partition table (e.g., merged /vendor) | High | re-partition operation failed. odin
: Swap your current USB cord for an original OEM Samsung cable.
What is the exact of your Samsung device (e.g., SM-G991B)? Which version of Odin are you currently using? In normal flashing circumstances, you do not need
If you're still struggling, providing more details about your device (model, current Android version) and the exact steps you're taking could help narrow down a more specific solution.
If you have attempted all of the methods above, used different cables, tried different USB ports, and verified your firmware is correct, the issue may stem from physical hardware failure. Over time, the NAND flash memory chips in smartphones wear out. When bad sectors develop in the partition tables, software like Odin is physically blocked from re-writing the storage blocks. | Symptom | Likely Cause | Confidence |
If you must re-partition (e.g., to fix a boot loop or corrupted storage), you need the exact PIT file for your specific model and storage capacity.
Go to the official Samsung Developers Portal to download and install the latest Samsung Android USB Drivers . Reboot your PC after installation.