Fagor Fi-80 Dishwasher Manual Patched Jun 2026

The Fagor FI-80 is a heavy-duty, hood-type (pass-through) commercial dishwasher engineered for high-volume foodservice operations. Known for its efficiency, speed, and robust stainless steel construction, keeping this machine running requires quick access to its operational guidelines.

10007135 rev. 01 (FI-80)

Convertible between 1-phase and 3-phase power during installation.

Do you need assistance finding specific for repairs? Share public link fagor fi-80 dishwasher manual

Offers three settings: 55, 75, and 120 seconds . Operating Temperatures: Wash: 150°F (66°C). Rinse: 190°F (88°C) for sanitization. Tank Volume: 50-liter washing tank.

Ensure the stainless steel pump filters and scrap trays are clean and securely seated.

Wipe down the interior chamber with a damp cloth. Do not use steel wool or abrasive cleaners. Reinstall the filters and overflow tube. Weekly Maintenance The Fagor FI-80 is a heavy-duty, hood-type (pass-through)

Turn the selector switch to the "0" (OFF) position, raise the hood, and remove the overflow tube . Close the hood and turn the switch to the drain setting ; the pump will run for about 3 minutes.

If you need help with a specific issue, could you tell me (e.g., not heating, leaking, flashing an error code) so I can provide the exact repair steps ? Share public link

180°F to 190°F (82°C to 88°C) for high-temperature sanitizing. Loading and Washing 01 (FI-80) Convertible between 1-phase and 3-phase power

Is your Fagor FI-80 equipped with a or analog push-buttons ?

: FI-60, FI-70, or FI-90 have near-identical internals and controls. Their manual will work 95% for the FI-80.

Scrape food debris off the dishes before loading them into the rack. Do not overload or stack plates on top of each other. Slide the rack into the machine and pull down the hood.