Makerbase Mks Dlc V21 Manual Link 2021

: Once set up, you can use the MKS DLC V21 to control and monitor your machine. This could involve starting prints, monitoring temperatures, and adjusting settings on the fly.

If an axis moves in the wrong direction during testing, change this value (values range from 0 to 7 to invert different combinations of X, Y, and Z).

Useful for Z-axis height probing or auto-leveling tasks. 4. Software Setup & Firmware makerbase mks dlc v21 manual link

A comprehensive MKS DLC32 Wiring Manual covers power input, motor drive settings, and laser module connections.

If you are running into specific technical issues with your setup, please share , which stepper drivers you are using , or any error codes showing in your software console so I can provide customized troubleshooting steps. Share public link : Once set up, you can use the

For advanced troubleshooting or modifications, the MKS DLC V2.1 Schematic is available on GitHub.

: Some devices require calibration to ensure accurate readings or outputs. The manual should guide you through this process. Useful for Z-axis height probing or auto-leveling tasks

If your laser engraver uses two motors for the Y-axis, use the secondary Y-driver slot to run them simultaneously. 4. Laser Module Wiring

What distinguishes the DLC v2.1 from a standard microcontroller is its integrated design. It consolidates power management, stepper motor headers, and specialized interfaces for lasers and spindles into a single, compact footprint. Its versatility is its greatest asset; with dedicated pins for TTL laser control and dual Y-axis outputs, it simplifies the complex wiring typically associated with gantry-style machines.

If you need to update or change the firmware from a CNC setup to a Laser setup: Download or XLoader .