body
ok
cancel
body
: Select "I accept the terms of the license agreement" in the License Agreement window.
| Issue | Solution | | :--- | :--- | | Software won't start after connecting the camera. | Wait a few moments for the system to recognize the camera, or close and reopen the software. | | "Camera Selection" window appears. | The camera is not connected or the driver is not installed properly. Reinstall the USB driver following the steps above. | | Yellow exclamation mark in Device Manager. | Driver not installed correctly. Use "Update driver" as mentioned above. | | No live image even though software starts. | Ensure the camera is connected to the that was used when you installed the driver. |
October 26, 2023 Prepared By: Technical Support Team Subject: Installation Process and Configuration Summary for STCADSware x64 v305
I can provide specific optimization steps or driver configurations for your exact hardware setup. Share public link stcamsware x64 v305 install
: Integrated digital zoom and a customizable user menu for manual setup.
: Open StCamSWare x64 from the desktop shortcut or Start menu to begin the camera discovery process. Key Features
When working with high-resolution models, ensure you use matched to the camera's resolution to prevent image degradation. If you experience lag during video capture, try saving files to an SSD or reducing the frame rate to lower the write load on your storage. : Select "I accept the terms of the
: Windows 10 or Windows 11 (64-bit versions exclusively).
Connect your industrial camera to a dedicated USB 3.0 port (typically color-coded blue) using a high-quality, screw-locking USB3 cable. Avoid external USB hubs.
Ensure you are executing the specific and not the legacy v1.10 (x86) application package. | | "Camera Selection" window appears
Ultimate Installation Guide for StCamSWare x64 v3.05 is the dedicated, high-performance viewing and camera-control software developed by Omron Sentech (formerly Sentech) for their industrial STC series USB cameras . This specific 64-bit version maximizes the processing capability of modern Windows environments, ensuring low-latency image capture, flawless hardware triggering, and comprehensive sensor control.
The easiest way to get StCamSWare x64 v3.05 is from the official Sentech website or from the CD-ROM that came with your camera.