The standard defines a crimp connection as a non-detachable, homogeneous joint formed between an electrical conductor and a crimp contact barrel using controlled, localized deformation. By compressing the metal components under intense mechanical pressure, the surface oxides break down, creating an airtight, gas-tight interface that prevents environmental degradation.
A very specific request!
Pull force. A 0.5 mm² wire must withstand at least 135 N of pull without detaching. Voltage drop under 5 mV per ampere. Salt spray. Thermal cycling.
Utilizing connections that meet the DIN EN 60352-2 standard provides several advantages: din en 60352-2 pdf
Understanding DIN EN 60352-2: The Definitive Guide to Crimp Connections
The standard specifies permissible materials for both the conductor and the terminal. Copper is the baseline reference, but variations in plating (tin, silver, gold) are accounted for because they influence electrical conductivity and corrosion resistance over time. 2. Mechanical Performance (Pull-Out Force)
: The German national version, published by the Deutsches Institut für Normung. The standard defines a crimp connection as a
If you are looking for the , you are likely seeking the "gold standard" for crimping requirements. This European standard (equivalent to the international IEC 60352-2 ) defines the general requirements and test methods for these critical components. What is DIN EN 60352-2?
Ensure your pull tester and micrometer are calibrated traceable to ISO/IEC 17025. The standard does not specify brands, but it does require a pulling speed of 25 ± 5 mm/min.
Avoids cold solder joints and damage to wire insulation. Where to Find the DIN EN 60352-2 PDF Pull force
Modern press machinery uses CFM to analyze the force-versus-displacement curve of every single crimp in real-time, instantly flagging anomalies.
These connections are created using appropriately designed, uninsulated or pre-insulated crimp barrels. The standard is intended for use in telecommunication equipment and electronic devices that employ similar techniques. It does not apply to the crimping of coaxial cables.
The primary distributor is , which evolved from the former Beuth Verlag .