: Turn off the copier using the main power button, unplug it from the wall for at least 30–60 seconds , and then plug it back in.
Look at the back of the machine at the controller board. If the LEDs are not lighting up or flashing in an unusual pattern, the board may need replacement.
If you are comfortable opening access panels (as suggested in some Ricoh Maintenance Guides ), ensure the interface cables are firmly seated on both the controller board and the operation panel.
If a new panel and cable do not resolve the issue, the main controller board is likely defective and requires replacement. Prevention and Maintenance
While it sounds technical, many users can resolve this without a service call by following these troubleshooting steps. 1. The Hard Reset (First Response) sc673-10 ricoh error
Check the USB and power cables connecting the Smart Operation Panel to the machine.
If the machine was recently moved or serviced, a cable may have shifted.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
This is the most common solution for the SC673-10 error. You will need to enter the printer's Service Program mode. : Turn off the copier using the main
Plug the device back in and restart to see if the communication re-establishes.
Outdated or corrupted firmware can prevent the "Flair" communication from initiating correctly. Hardware Issues:
If the machine boots into service mode or allows partial menu navigation, check the system parameter settings.
You should contact a certified Ricoh Service Representative if: The error comes back immediately after a hard reset. You are uncomfortable opening the machine's plastic panels. If you are comfortable opening access panels (as
How to reset Ricoh Error Code sc542 sc547 sc546 sc548 problem -copiers
Disconnect any network cables (LAN/Ethernet) and USB print cables. Wait at least 60 seconds.
A trained technician can also perform advanced diagnostics using the Ricoview Remote Panel or debug serial console, which are not available to end users.
Title: How to Fix Ricoh Error SC673-10: Smart Operation Panel Issues If your Ricoh multifunction printer (MFP) is displaying the