When stopping in Auto or Manual, the controller may run the engine for a "Cooling Down" period (typically 120 seconds) before fully shutting off. 💻 Advanced Configuration For technical adjustments, the AC03 supports: PC Connection:
Uses UP/DOWN arrows and a PAGE button to scroll through measurement screens.
The AC03 "User" profile is restricted to viewing output data, while the
Warns that the alternator is not recharging the starter battery. Tactile Navigation Buttons pramac ac03 manual
True load amperage, kW, kVA, and power factor.
Ensure the battery voltage reads above 12.4V DC (for 12V systems) or 24.8V DC (for 24V systems) while standby. A weak battery can cause the AC03 microchip to reset during cranking.
Pramac AC03 is a microprocessor-based controller—often a rebranded ComAp InteliLite NT When stopping in Auto or Manual, the controller
Enter the authorized PIN using the arrow keys to adjust numeric values. Navigate through the parameter groups:
🟡 Pre-alarm warning (low fuel, minor battery voltage drop).
The engine is shut down, and the controller ignores any remote start signals. This mode is used during maintenance. Tactile Navigation Buttons True load amperage, kW, kVA,
The controller supports configuration via its front panel and, for more advanced tuning, through via its RS232 communication port. To adjust settings:
The AC03 features several operational modes that determine how the generator interacts with the load and the power grid:
Check fuel filters for restrictions. Verify RPM readings on screen. Dead battery; air in fuel lines; faulty starter solenoid. Test battery voltage. Bleed the fuel system if it ran dry. Charge Alternator Fail Broken V-belt; failing charging alternator; loose wire.
The generator is disabled and will not start manually or automatically. MAN (Manual) Mode:
The Pramac AC03 is a semi-electric or fully electric stacker designed for horizontal transport and stacking of palletized goods. It is commonly used in warehouses, factories, and loading docks.