Every inkjet printer handles excess ink drainage during routine printhead cleaning cycles and initial ink charging. The Epson Stylus SX130 deposits this stray ink into physical sponge blocks located at the base of the machine, known as the waste ink pads.
Warning: Using these tools may void your warranty (if still valid) and could brick your printer if misused. Proceed at your own risk.
. Ensure you disable your antivirus temporarily, as these utilities are often flagged as "false positives." Run the Utility AdjProg.exe Select Model : Click the button and choose from the Model Name list. Enter Adjustment Mode Particular Adjustment Mode Find the Counter : From the list, select Waste ink pad counter and click OK. Check and Initialize Check the box for Main pad counter to see the current usage percentage. Check the box again and click Initialization . This will reset the counter to 0%.
To many, this sounds like a hardware failure, but it’s actually a programmed safety measure. Inside the printer, collect excess ink from head cleanings. The printer doesn't actually "know" if the pads are full; it simply reaches a pre-set number of cleanings and locks itself to prevent potential ink leakage. The Solution: The "Adjustment Program"
Epson’s official stance is that when the “Service Required” error appears, the waste ink pads are full (or near full) and must be physically replaced by an authorized service center. They will reset the counter as part of that paid service. They do not provide end-user adjustment software. epsonsx130reset adjustment program upd
This is model-specific software used by technicians to reset internal counters.
This mod makes the a permanent solution rather than a temporary fix.
Epson SX130 Reset Adjustment Program Update
When these signs appear, it is safer to have the pads replaced or an external waste ink bottle installed to prevent ink from spilling inside the printer and causing electrical damage. Every inkjet printer handles excess ink drainage during
The utility can read printer status, display current error codes, and provide diagnostic reports that help identify specific hardware issues rather than just counter-related problems.
: Resetting the software counter does not physically clean the ink pads. If they are physically overflowing, ink may leak into the printer hardware. It is recommended to clean or replace the felt pads. Compatibility
: Clears the "Service Required" error that occurs when the internal sponges are theoretically full.
The Epson SX130 Adjustment Program offers a comprehensive suite of maintenance capabilities that extend beyond simple counter resets. Understanding these functions helps users maximize the utility of the software. Proceed at your own risk
The program, often referred to as a "resetter," is a Windows-based application used by service engineers and advanced users to perform maintenance tasks. Its most critical function is resetting the back to 0%, allowing the printer to resume operation without a trip to the repair shop. Beyond resetting the "absorber" (ink pad), the program can:
Epson printers feature an internal mathematical counter that estimates how much liquid ink goes into the physical absorption pads during cleaning cycles. Once this counter hits 100%, the printer triggers a hard lock to prevent physical ink overflow from damaging your desk or internal electronics.
: Corrects ghosting, horizontal banding, and blurry text artifacts. Why Does Your Epson SX130 Lock Up?