Voxelab Printer Software Link

Developed by Prusa Research, this open-source slicer has evolved into a powerhouse for non-Prusa machines, offering dedicated, native profiles for Voxelab printers.

Keep outer walls at 30–40mm/s for a flawless cosmetic finish, while infill can safely run at 50–60mm/s on standard Aquila frames.

Extremely reliable for Voxelab printers; no guesswork with settings. Cons: Limited advanced controls (e.g., no ironing, few infill pattern options); slower updates compared to open-source slicers. voxelab printer software

, and Proxima series—have taken the 3D printing world by storm with their excellent value. However, the hardware is only half the battle. To get high-quality prints, you need the right .

Because Voxelab printers (specifically the Aquila) are clones of the Ender 3 , you can use the "Ender 3 Pro" profile for a seamless setup . Developed by Prusa Research, this open-source slicer has

Firmware runs on the printer’s mainboard. Voxelab ships printers with a modified version of .

: Lacks the deep customization and advanced experimental features found in professional-grade slicers. Cons: Limited advanced controls (e

The slicer converts a 3D model (STL, OBJ, 3MF) into G-code that the printer understands.

If you install Klipper firmware, you must use Mainsail or Fluidd as the frontend. These provide:

The Ultimate Guide to Voxelab Printer Software: Choosing, Setting Up, and Optimizing Your Slicer