Setting up ten printers used to mean repeating the same process ten times. With v5.0, you can now apply network settings to multiple devices simultaneously. Select the devices you want to configure, set the static IP, subnet, and gateway, and click .
The tool comes as a package containing different .exe files:
: Open the tool and enter the printer's current IP address (the factory default for many Gprinter models is 192.168.123.100 Applying New Settings Enter the desired New IP Address "Set New IP Address" Listen for the printer buzzer , which indicates the settings were received. gp ethernet printer tool v5.0
: Ping the printer directly through the tool to verify it is reachable over the Ethernet cable.
: If you cannot "ping" the printer after changing the IP, verify that you haven't assigned an address already in use by another device on your network. Setting up ten printers used to mean repeating
If you are still running v4.0 or older, you are likely missing out on stability. Older versions sometimes struggled to save settings on newer hardware revisions of GP printers.
: View current printer hardware information and firmware versions. How to Use the Tool The tool comes as a package containing different
Most factory units ship with a predefined standard address, typically .
When support calls are inevitable, the tool generates a comprehensive .txt export including ARP table entries, switch port responses, and last 50 internal printer errors.
Ensure the green and amber link lights on the printer's Ethernet port are blinking. If they are completely dark, try a different LAN cable. 🏁 Conclusion
Complete Guide to GP Ethernet Printer Tool v5.0: Configuring Your GPrinter