Hager Controls Bp 10140 Manual Top Jun 2026

Based directly on the manual’s top instructions:

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

: A common theme in Hager "stories" is the power of human control. Most devices, like the EHN110 Daily Time Switch

The device operates continuously regardless of segment positions. hager controls bp 10140 manual top

Instantly verify system demands and battery health.

: Look at the front face or the side label for an alphanumeric sequence.

Need help with a specific programming step or wiring diagram for your Hager EG103 Based directly on the manual’s top instructions: This

Enables turning lights on/off during construction before the automation system is commissioned. 2. High-Capacity Relay Contacts

This article will first demystify the BP 10140 code, then guide you through the Hager product naming convention, and finally direct you on where to find the for the full range of Hager Controls products, including those related to KNX building automation.

Ensure the timer is in "AUTO" mode and not "OFF". Check that the relay status shows ON on the screen. Wrong Time Displayed: Re-enter the time/date settings. Can’t copy the link right now

Here are common Hager KNX devices that reference the BP 10140 address in their documentation:

: Potential-free contacts (often terminals 1 and 2) that act as a switch for the load.

Normally Closed (rarely used, typically for cooling applications)

While many valves can be installed in various orientations, best practices for the BP 10140 suggest installing it in a horizontal pipe with the actuator facing upwards. This orientation prevents debris accumulation within the valve bonnet and ensures the actuator’s weight does not stress the pipe connections unnecessarily.

Since the address indicates "Hager Controls S.A.S.," your physical unit likely requires specific handling: