Software Dlms Ashly Protea 48 Install -

Check your USB cable connection. Try switching to a different USB port on your PC (preferably a USB 2.0 port rather than USB 3.0, as older firmware responds better to USB 2.0). Driver Error (Yellow Triangle in Device Manager)

Plug the flat end (Type-A) of the USB cable into an open port on your computer. software dlms ashly protea 48 install

Choose the installation directory (the default folder in C:\Program Files (x86)\Ashly\ is recommended). Check your USB cable connection

After the main software is installed, you need to ensure your computer can communicate with the Protea hardware via USB. Ashly uses standard USB drivers that occasionally require an extra step for certain processors. Choose the installation directory (the default folder in

| Issue | Probable Cause | Solution | | :--- | :--- | :--- | | | PC Firewall blocking UDP ports. | Disable firewall or create an Inbound Rule for Protea.exe allowing UDP ports 5000-6000 (verify specific Ashly ports in manual). | | Connection Timeout | IP Address conflict. | Disconnect the unit from the network, connect directly to PC, and factory reset the network settings. | | DLMS Settings Not Saving | Write protection enabled. | Check if the unit is in "Lock" mode; unlock via the physical front panel button or software password. |

The Ashly Protea 4.8SP Go to product viewer dialog for this item.

Unlike modern software, DLMS does not auto-save. You must manually save two things: