Jinka Jk 1351 Driver — Software ((exclusive))

Set the to 9600 or 19200 (default for most Jinka models). Troubleshooting Common Driver Issues

Most Jinka plotters use a USB-to-Serial bridge chip. If your computer does not recognize the device when plugged in, you likely need to install one of the following: CH340 USB-Serial Driver

Visit the official Jinka website or your software provider's portal (like SignMaster).

Under "Use an existing port," select (or the next available virtual printer port for USB).

Once the driver is installed, you must tell your software (e.g., SignMaster) which COM port to use. Open SignMaster. Go to the or Cutter Setup . Select the Jinka manufacturer and Go to product viewer dialog for this item. model. jinka jk 1351 driver software

driver. Once installed, your PC will recognize the cutter as a COM port (usually COM3 or COM4) in the Device Manager. 2. Design & Cutting Software

Getting your installed correctly is the key to a smooth workflow. Take your time with the installation, ensure your USB cables are secure, and always double-check that your COM port settings match.

: Some retailers bundle the machine with "Jinka Cut" software, which includes a contour trimming wizard for beginners. Installation & Configuration Driver Setup : After installation, the device should appear in Device Manager Ports (COM & LPT) as "USB-Serial CH340" or similar. Connection

Right-click on the installer and select 3. Install the Driver Follow the on-screen prompts. Click "Install" and wait for the process to complete. Click "OK" or "Finish." 4. Connect the Plotter Connect the Jinka 1351 Go to product viewer dialog for this item. to your computer using the USB cable. Set the to 9600 or 19200 (default for most Jinka models)

Locate the official driver. It is usually provided on the USB drive or CD-ROM that arrived in the box with your Jinka plotter. If you do not have the disk, you can download the official CH340/CH341 driver directly from the official WCH (Jiangsu Qinheng Co.) website to ensure it is malware-free and up to date. Step 2: Run the Installer

Do not connect your Jinka cutter to the computer via USB until the driver software installation is complete. Step 3: Add the Printer Manually

Windows 11 sometimes blocks older CH340 drivers. Restart your PC in Advanced Startup Mode and select Disable Driver Signature Enforcement , then reinstall the driver. To help give you the exact fix, tell me:

Because the USB connection operates by mimicking a serial COM port, installing the correct is the single most critical step in the setup process. Step 1: Downloading the Correct Drivers Under "Use an existing port," select (or the

Select the appropriate INF file and complete the installation. 4. Configuring Port Settings in Design Software

: Adjusting this (typically to around 15ms) smooths the entry and exit of the blade, preventing jagged edges on delicate vinyl.

Look for , where "x" is an assigned number (e.g., COM3). Note this number down. 4. Configuring Your Cutting Software