Plug microphones into the XLR inputs and instruments into the line inputs.
Controls the left/right stereo balance in the main output.
Pair your Bluetooth-enabled device (smartphone, tablet, etc.) with the mixer to stream audio wirelessly. Once paired, the Bluetooth audio will be available as an input source, allowing you to mix it with your other channels.
Turn all Channel Gains, Channel Levels, and Master Levels to zero. Plug in all microphones, instruments, and source cables. Connect the mixer's USB power cable and toggle the unit on.
: While speaking into a microphone, gradually increase the Gain knob for that channel until the level meter reaches near 0dB without hitting the red (clipping). drembo m6 mixer user manual
: A dual vertical light ladder displaying output strength in decibels to prevent signal distortion. 2. Setting Up and Powering the Mixer
Yes, if your tablet supports USB audio input. You would need a "USB OTG" (On-The-Go) adapter to connect the mixer's USB cable to your tablet. The mixer may also draw power from the tablet, so check your device's specifications.
Carefully remove the mixer from its packaging. Place the Drembo M6 on a sturdy, level surface with adequate space around it for cable connections and easy access to the controls.
Manages the collective master volume sent to your studio monitors, speakers, or PA system. Plug microphones into the XLR inputs and instruments
Connect your powered speakers to the MAIN OUT (TRS or XLR).
: Small and lightweight enough to fit in a backpack for mobile setups. Ease of Use
Place the empty mixing bowl onto the bowl rest or base. Turn the bowl clockwise until you feel or hear it click, confirming it is securely locked into place. To remove the bowl, you will usually turn it counterclockwise.
: Adjusts the initial amplification level of the incoming raw signal. Once paired, the Bluetooth audio will be available
: Lower the mixer's individual Channel Gain and Master Volume pots to around 70%. Increase the volume on your source device or pull the microphone closer to the audio source instead. No Sound from Condenser Microphone
Connect the Type-C port to your computer. It should automatically recognize it as a generic USB Audio Codec
: Ensure the master volume and channel faders are turned all the way down. Power on any external devices like microphones or instruments connected to the mixer.