: Recent releases like v1.0.7.2 (2024-02-21) include updated firmware libraries to support newer NAND flash types. How to Use the Tool

The chipYC2019 designation is a specialized hardware identifier deeply linked with the FirstChip FC1179 controller series.

💡 : If your drive shows "No Media" or "0MB" even after using this tool, the NAND flash chip inside may be physically damaged. If you'd like to move forward, tell me: What is the exact Error Message you are seeing? What did ChipGenius report as the "Controller Part-Number"?

Select "Low Level Format" for severely corrupted drives, or "High Level Format" for quick partition fixes.

Once the tool reports “SUCCESS”:

: Detects and fixes "expanded" memory issues common in low-quality drives. How to Use the MP Tool

Set this to "Low Level Format" or "Capacity Optimize" to sweep the chip for dead blocks.

I can provide specific settings or a download link based on those details. Share public link

. When generic Windows formatting tools fail, low-level factory flash utilities like this one bypass operating system restrictions to overwrite bad NAND blocks and rewrite vital controller code.

Note: You may need to disable Windows Defender, as these low-level tools are sometimes flagged as viruses. Step 3: Operating the FirstChip MP Tool Unzip the downloaded tool.

| Error Code | Meaning | Solution | |------------|---------|----------| | =0x10 | Bad block count too high | Replace NAND (drive is dying) | | =0x20 | Flash ID mismatch | Manually select correct NAND type | | =0x31 | ISP download failed | Short flash pins to force pre-format mode | | =0x42 | USB communication error | Reinstall driver; use USB 2.0 port | | =0x90 | Timeout during erase | Drive may be counterfeit; try lower capacity |

This specific MP Tool utility is designed to address critical firmware-level issues:

Download FW → Erase → Program → Verify → Build FTL → Format