Gorenje Wa 50050 Manual Updated Online

Unscrew the plastic filter counter-clockwise and pull it straight out. Remove coins, lint, buttons, or debris trapped inside.

Check that the internal impeller blade spins freely by hand.

: Unplug the machine and check the carbon brushes on the main drive motor. Worn-out carbon brushes are the most common cause of rotation failure on this model and are inexpensive to replace. gorenje wa 50050 manual updated

| Problem | Likely Cause (from manual) | |--------|----------------------------| | Won’t start | Door not fully closed / Child lock on (hold Temp+Spin 3 sec) | | No water | Tap off / Inlet filter clogged (check behind hose connection) | | Not draining | Pump filter blocked (emergency drain hose behind bottom flap) | | Vibrating heavily | Transport bolts still installed (must remove before use) | | Cycle takes too long | Overloading or unbalanced load – redistributes manually |

While the physical mechanics of the WA 50050 have not changed, updated usage guidelines often recommend: Unscrew the plastic filter counter-clockwise and pull it

Turn off the power at the wall breaker for 10 minutes to reset the electronics. If the error persists, the sensor requires replacement. 7 Flashes: Water Draining Failure

: Connect the inlet hose to a 3/4-inch threaded cold water tap. Ensure the rubber washers are present on both ends to prevent leaks. : Unplug the machine and check the carbon

This updated manual summary for the Gorenje WA 50050 ensures you have all the necessary information to keep your machine running smoothly.

Clean the filter; check the drain hose for blockages.