×
| Feature / Model | Airbot Supersonics 3.0 | Airbot Supersonics 4.0 | Airbot Supersonics Pro Series (incl. 2.0, Aura, VDE) | | :--- | :--- | :--- | :--- | | | Up to 19,000 - 20,000Pa | Up to 20,000Pa | Up to 25,000 - 27,000Pa | | Motor Power | 150W - 190W | 150AW | 180AW - 250W | | Motor Speed | Not specified | 120,000 RPM | 120,000 RPM | | Dust Cup Capacity | 0.6L - 0.8L | 1.0L | 0.6L - 0.8L | | Battery Capacity | 2200mAh Li-Ion | 2200mAh Li-Ion | 2200mAh Li-Ion | | Run Time (Eco Mode) | Up to 45 mins | Up to 30 mins | Up to 30 - 50 mins | | Handle Weight | ~1.3kg | 1.3kg | 1.2kg - 1.3kg | | Filtration | 3rd Gen Cyclonic + HEPA | 5-Layer + HEPA | E11/E13 HEPA + Cyclonic | | Key Innovations | LED battery status, Cyclonic tech | Slim ergonomic handle | Laser dust detection, Smart LED display |
Turn off vacuum. Let it cool for 30 minutes. Check for clogs. Damaged power adapter or cable. Inspect cable for fraying. Replace adapter if necessary. Safety Guidelines
I can provide targeted troubleshooting steps or part replacement advice. Share public link airbot supersonics manual
Press the speed adjustment button on the rear display to cycle between:
Before using it for the first time, connect the included charger to a wall outlet and plug it into the vacuum's charging port. A full charge is essential for optimal run time, which can take up to 4 hours. | Feature / Model | Airbot Supersonics 3
By following this guide, you'll be able to enjoy clean and healthy air with your Airbot Supersonics. Happy breathing!
| Component | Frequency | Tool Required | Instruction | | :--- | :--- | :--- | :--- | | | After every use | None | Press the top latch, empty over trash can. | | HEPA Filter | Once a week | Cleaning tool | Tap gently; do not wash with water (only replace). | | Side Brushes | Every 2 weeks | Screwdriver | Untangle hair; replace if bristles are bent. | | Main Brush Roll | Weekly | Cleaning brush (knife side) | Cut hair with the built-in blade. | | Cliff Sensors | Monthly | Dry cotton swab | Wipe dust away to prevent fall errors. | | Charging Contacts | Monthly | Dry eraser | Rub gently to remove oxidation. | Check for clogs
Allow all parts to air-dry completely for 24 hours before reassembling. Cleaning the Roller Brush Flip the floor brush head over. Release the lock tab on the side of the brush head. Pull out the rotating roller brush.
Recharge the battery. Check for clogs in the filter, tube, or brush head, then let the unit cool down for 30 minutes.
Slide the battery pack into the base of the main unit until it clicks. Attach Tube: Connect the metal tube to the main unit.
The Airbot Supersonics is a popular, lightweight cordless stick vacuum cleaner known for its strong suction power and budget-friendly price point. This comprehensive guide serves as your complete user manual, covering everything from initial assembly and operation to routine maintenance and troubleshooting. 📦 What’s in the Box & Product Overview