Achi Ir6500 Software (2026)
The Achi IR6500 software may be used in various industries, such as:
| Specification | Value | | :--- | :--- | | | 475 x 480 x 420 mm | | Weight | Approx. 15-16 kg | | Power Supply | 220V AC ±10%, 50/60 Hz | | Total Power Consumption | 1250 W | | Upper Heater | 400 W, dark infrared, 80×80 mm | | Bottom Heater | 800 W, 180×180 mm | | Maximum Temperature | 400°C | | Max. PCB Size | 400 × 305 mm | | Max. Chip Size | 70 × 70 mm |
Save the profile with an easily identifiable name (e.g., Xbox_360_GPU_LeadFree.txt ).
The Achi IR6500 is a high-performance infrared (IR) thermal imaging camera designed to capture detailed thermal images in a wide range of applications, including predictive maintenance, electrical inspection, and building diagnostics. To unlock the full potential of this powerful tool, it's essential to understand the Achi IR6500 software that comes with it. In this article, we'll provide an in-depth look at the Achi IR6500 software, its features, and how to use it to enhance your thermal imaging experience. achi ir6500 software
The is a staple infrared BGA rework station valued by electronics repair technicians for its affordability and reliability . However, hardware is only half the equation. To prevent damaged circuit boards and successfully resolder chipsets, you must understand how to install, configure, and operate the Achi IR6500 software .
To get the most out of the Achi IR6500 software, here are some tips and tricks:
Input the , Ramp Rate (degrees per second, usually kept between 1.0 to 3.0 ), and Hold Time (in seconds) for each step. The Achi IR6500 software may be used in
Ensure your serial port communication settings (as shown in Device Manager) match the controller's settings. Users have reported success with the following configuration:
Open Windows Device Manager. Look under Ports (COM & LPT) . If you see a yellow exclamation mark next to "USB-Serial," you need a driver.
The ACHI IR6500 does not run on a proprietary, standalone operating system. Instead, it relies on a PC connection to communicate with its internal temperature controller, usually a PC410 or a similar Rex-C100 derivative. The software acts as a visual interface. It allows you to: Chip Size | 70 × 70 mm |
Connect the Achi IR6500 to your PC using the provided USB cable. Turn on the rework station.
Installing and running the software can be challenging due to its age and original driver requirements: