Validation checks the project for errors such as undefined variables, missing drivers, or incorrect panel links. To validate, go to the menu and choose Validate , or press the validation button on the toolbar. Any errors are displayed in the Feedback Zone, and you must correct them before proceeding.
Before you can start using Vijeo Designer 62, you need to install it on your computer. Here are the steps to follow:
⚠️ The script runs continuously – about every 100-200ms. For a real project, use a timer for accurate seconds. vijeo designer 62 tutorial
: Use the Recipe Editor if your machine needs to store different operating parameters (e.g., "Product A" vs "Product B" settings).
In the Navigator, click on the root node to open properties. Validation checks the project for errors such as
| Name | Type | Address (Modbus) | Data Type | Initial Value | |------|------|------------------|-----------|----------------| | Motor_Start_Stop | Read/Write | 40001 | Bool | 0 | | Motor_Running | Read Only | 40002 | Bool | 0 | | Run_Seconds | Read/Write | 40003 | UInt | 0 |
The installation procedure is straightforward: Before you can start using Vijeo Designer 62,
Your project is now running on the physical hardware.
