Harvey Hv3 Water Softener Installation Manual Online

: It covers the standard 9-step installation process, including shut-off, bypass valve fitting, and unit connection.

Installing a Harvey HV3 water softener involves connecting the unit to the main water supply, typically under the kitchen sink or in a utility space, following WRAS-approved procedures and maintaining water pressure between 1.7 and 6.0 bar. The process requires a three-valve bypass, proper drainage with an air gap, a 5-liter initial water charge, and the use of block salt. For the full installation manual, visit Harveys water softener installation manual

: A non-return valve must be included in the incoming supply. Flexible Hoses

. The installation instructions may lack some details that a professional installer would know. Self-installation may void your warranty, so consider this carefully before proceeding. harvey hv3 water softener installation manual

The salt cabinet has an overflow port at the back. If the brine tank overfills (rare, but possible), this prevents flooding.

Place a valve between the inlet and outlet tees. When closed, water flows through the softener; when open, it bypasses it. 4. Connecting the HV3 Unit The HV3 uses high-quality braided hoses for flexibility.

I can provide tailored plumbing tips or adjustments for your specific setup. : It covers the standard 9-step installation process,

Harvey water softener review, types and step by step installation.

: Under Water Regulations Advisory Scheme (WRAS) guidelines, you must preserve at least one un-softened (hard water) drinking tap in the house, typically at the kitchen sink. Tools and Parts Required

: Use WRAS-approved high-flow flexible hoses to connect the unit to the plumbing manifold. Step-by-Step Installation Summary Prepare the Supply : Shut off the main water supply and drain the lines. Connect Hoses For the full installation manual, visit Harveys water

Check that the bypass valve is not still in the 'bypass' position. Ensure the softener is properly connected to the rising main.

The Harvey HV3 is designed specifically to use block salt, which is cleaner and easier to manage than tablet salt. Open the front lid of the Harvey HV3.