Ericsson Mini Link Cli Commands -

show sdh alarm 1

MINI-LINK# script apply tftp://192.168.1.200/eth-settings.txt

show system : Displays basic node information, including system uptime, location, contacting info, and hardware description.

: Elevates your terminal level to Privileged Exec Mode. ericsson mini link cli commands

enable : Used to raise the privilege level to , which allows configuration changes.

What of MINI-LINK are you configuring? (e.g., TN, CN, LH, 6000 series)

This guide is accurate for MINI-LINK TN, CN, and PT series running EOAX or later software branches. Syntax may vary slightly between models; always check the specific product’s CLI Reference Manual. show sdh alarm 1 MINI-LINK# script apply tftp://192

show policy-map interface ethernet 1 # Packet matches, drops, queuing stats

: Shows vital signal-to-noise metrics, including the Carrier-to-Interference (C/I) ratio and MSE (Mean Square Error).

The Ericsson MINI-LINK CLI provides comprehensive control for microwave link deployment. Key areas include radio configuration, Ethernet switching, synchronization, and fault management. Operators should focus on show radio link , show interfaces , and show alarms for daily monitoring. Configuration changes require the commit model on newer platforms. What of MINI-LINK are you configuring

: Displays critical metrics like TX power, RX level (RSL), and frequency.

? : Provides context-sensitive help or lists available sub-commands.

Reboots a specific plug-in card or performs a soft reboot of the entire chassis. Use with caution, as this causes traffic disruption. Saving the Configuration

: Enters configuration mode to modify system settings. exit : Moves back one level in the command hierarchy. top : Returns directly to the root configuration level. 2. System and Hardware Diagnostics