If you upgrade to a newer graphics card (such as a GTX 10-series, RX-series, or newer), the computer may hang on a black screen or freeze at the Acer splash logo. This happens because newer graphics cards require a UEFI-compliant BIOS environment.
is a Micro-ATX motherboard commonly found in Gateway and Acer desktop systems such as the Gateway DX4870
The PCIe 3.0 x16 slot allows for modern, low-power graphics cards. Ensure your power supply (PSU) is adequate, as the original Acer PSUs are often only acer ipimbar rev 102a manual new
Because this is an OEM board, you won't find a standalone "retail" manual. Instead, you must look for the support documentation for the specific desktop model it was shipped in.
Dedicated input ports for a legacy keyboard (purple) and mouse (green). If you upgrade to a newer graphics card
Wait exactly 15 seconds, then move the jumper back to Pins 1-2 before restarting. Rear I/O Panel Layout
, to resolve "black screen" errors or boot failures after hardware swaps. Ensure your power supply (PSU) is adequate, as
: Connect a standard 24-pin ATX power supply line to the board edge connector.
This article provides a comprehensive manual replacement—covering specifications, jumper settings, front panel pinouts, BIOS recovery, and where to find official documentation.