Strands S68 Drill Press Manual Best Jun 2026

Do you need help with or mechanical parts sourcing ?

The S68 is equipped with an adjustable depth gauge on the front face of the quill housing. Column drill press Strands S25 (standard) - Gnosjö Maskin

Since Strands no longer exists as a standalone brand (absorbed into larger conglomerates in the 1980s), finding an original manual requires detective work.

The S68 typically features a dual-speed motor and a geared head with 8 spindle speeds. Specification Up to 20mm in mild steel Spindle Speeds 8 speeds, typically ranging from 100 to 2900 or 3020 RPM Spindle Taper Morse Taper 3 (MT3 / MK3) Quill Travel 130mm to 140mm Motor Power 0.9 kW to 1.1 kW, usually 3-phase 380-415V Table Size Typically 500 x 350mm or 420 x 270mm Weight Approximately 160kg to 200kg 2. Official Manual & Documentation Strands S68 Drill Press Manual

The S68 is characterized by its robust gear-driven head, which allows for consistent torque across various speed settings. : Up to 20mm in mild steel.

slightly if the gears do not immediately mesh or engage. Operational Guidelines and Controls

Lower the spindle until the drift slot is visible. Insert a standard MT3 drill drift into the slot and tap it gently with a hammer while supporting the tool below to prevent it from dropping onto the table. Table and Head Adjustments Do you need help with or mechanical parts sourcing

The Strands S68 table can rotate 360 degrees around the column. Ensure the column clamp is completely locked before drilling to prevent tool deflection. Quill Return Spring Tension

Use an (A-42 or equivalent). To replace:

Manual hand-feed with some models featuring automatic power feed. ⚙️ Operating Instructions 1. Speed Selection The S68 typically features a dual-speed motor and

What is the or serial number stamped on the ID plate? Does your model feature manual feed or power feed ?

Loosen the column clamping levers located on the back of the table bracket or headstock. Use the crank handle to operate the rack-and-pinion mechanism to raise or lower the assembly.

Never hold a workpiece by hand while drilling. The high torque of the gear-driven headstock can violently snatch material, causing severe injury. Always secure workpieces using a heavy-duty drill press vise clamped directly to the table T-slots.

The Strands S68 is a high-quality Swedish gear-driven drill press designed for precision, featuring 8 spindle speeds ranging from 100 to 2,900 RPM and a 1.1kW motor. Technical documentation, including manuals for similar models and specifications, is available from Newmac Equipment. For more details, visit Newmac Equipment Strands S68 Geared Head Drill - Newmac Equipment

Regular maintenance is crucial to extend the lifespan of your Strands S68 drill press. Refer to the manual for: