Switch to 220-grit sandpaper and sand all flat faces and routed edges until they are completely smooth to the touch. Step 5: Assembly
Before cutting into your primary wood, use these dimensions to sketch out your pieces: Plywood / Hardwood Rocker Rails Plywood / Hardwood Seat Platform Plywood / Hardwood Backrest Support Plywood / Hardwood Handlebar Dowel Hardwood Dowel Footpeg Dowel Hardwood Dowel Internal Cross Braces Scrap Wood Step-by-Step Construction Guide Step 1: Creating the Templates
Trace the templates onto your 3/4-inch plywood sheet. You will need: monkey rocker plans
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Sanding before assembly is significantly easier than trying to sand tight corners after the rocker is put together. Switch to 220-grit sandpaper and sand all flat
Identify where the child’s hands and feet will naturally rest. Using a 1-inch Forstner bit or spade bit, drill a hole completely through the head of both monkey profiles for the handle. Drill a matching hole near the lower front for the footrest.
Cut the seat platform (10" x 12") and backrest (6" x 10") using a table saw or circular saw. This link or copies made by others cannot be deleted
are recommended for their durability and strength in high-use furniture. Key Design Elements