Sp Flash Tool Stuck On Download Da 100 //free\\

In SP Flash Tool, click the Choose button next to "Download-Agent".

Run the bypass tool, click "Disable Auth," and then connect your phone while holding the Volume buttons. Once the tool says "Success," immediately hit "Download" in SP Flash Tool. 4. Check Connection Settings

Install the required drivers as prompted by the bypass tool. Turn off your phone completely. Open the MTK Bypass Tool and click Bypass or Disable Auth .

If you are a MediaTek (MTK) Android user trying to flash stock firmware, root your device, or unbrick a phone, you have likely encountered the . It is a powerful tool, but it is notoriously finicky. One of the most frustrating errors users encounter is the SP Flash Tool stuck on "Download DA 100%" (often represented by a yellow progress bar at 100%). sp flash tool stuck on download da 100

If you're stuck on v5.20+, try v5.19xx. Many users report success by dropping back to for "DA 100%" errors on older phones.

Compatibility issues with newer Windows versions can cause the software to hang. Right-click flash_tool.exe and select .

Many modern MediaTek chips (like Helio and Dimensity series) utilize secure boot. If you do not bypass this authentication, the SP Flash Tool will hang indefinitely at DA 100%. In SP Flash Tool, click the Choose button

If using a desktop, use the ports directly on the motherboard (rear). 2. Update MediaTek VCOM Drivers

Locate the settings and switch from High Speed to Full Speed .

Tip: If you are using Windows 10 or Windows 11, you must before installing unsigned legacy drivers. 4. Adjust SP Flash Tool Connection Settings Open the MTK Bypass Tool and click Bypass or Disable Auth

Download an (such as MCT MTK Bypass or MCT Dongle tool).

Release the buttons the moment the progress bar changes color from red to yellow or grey. 6. Address Physical Hardware and Cable Issues