Tsc Ttp-244 Pro Driver Install - -

Keep the checkmark on selected, then click Finish . Step 3: Install the Printer Driver via Driver Wizard

To ensure the driver is communicating properly with the hardware:

Perform a hardware calibration: Turn off the printer, hold the button, turn on the printer, and release the button when the LED flashes. Labels Print Blank Verify the ribbon is loaded ink-side out facing the labels.

Note: If using a Serial (COM) or Parallel (LPT) port, select and manually choose the port. Step 7: Name the Printer Tsc Ttp-244 Pro Driver Install -

Ribbon is installed backward or wrong print method selected.

After installation, configure the driver settings to match your specific label sizes. Accessing Printer Properties Open the Windows . Click on Devices and Printers .

: Choose a location (like your Desktop) to extract the driver files. Driver Wizard : In the pop-up window, select "Install printer drivers" Connect & Power On : Turn the printer Keep the checkmark on selected, then click Finish

Select the correct USB virtual port (e.g., USB001 or USB002 ). If you are using a parallel or serial converter, select LPT1 or COM1 . Click Next . Step 5: Name and Complete the Setup

: Plug the USB cable into both the printer and an available port on your computer. Media Loading : Confirm that the are correctly loaded before turning the power on. 3. Installation Steps Run Installer : Open the downloaded file and accept the license agreement. Unpack Files

Follow the on-screen prompts, name your printer, and complete the installation. Configuring the Driver for First Print Note: If using a Serial (COM) or Parallel

, which are specifically designed to work with Windows programs like BarTender Software 2. Prepare the Printer

Before starting the installation process, ensure your hardware and environment are properly prepared to avoid communication errors:

Before downloading or running any installer, complete these five steps: