Gateman V20 Manual Exclusive Direct

: The unit runs on 4 AA alkaline batteries. It is recommended to replace them every 6 months to prevent leakage. Emergency Access : If batteries fail, you can touch a 9V battery

The Gateman WV-20 is an excellent choice for apartment dwellers or those looking for a secondary lock. If you are purchasing this unit, ensure you download a digital copy of the Gateman User Manual to keep on your phone, as you'll need the specific button sequences to add or delete RFID keys.

Open the battery cover on the internal body and press the button once. The keypad outside will light up.

9V Alkaline Battery (6LF22) — sold separately

Located at the bottom; uses a 9V battery if internal batteries die. gateman v20 manual

Are you dealing with an or a programming failure ?

While holding the battery in place, touch the keypad to wake it up, enter your PIN code, and press .

Are you trying to link it to a or home automation system ?

On the inside of the door, align the metal mounting bracket over the hole. Pass the cable through the bracket slot. Secure the bracket to the door using the provided screws. Step 5: Connect and Secure the Back Body : The unit runs on 4 AA alkaline batteries

Gateman V20 Manual: Installation, Programming, and Troubleshooting Guide

Walk to the outside unit and press the number on the keypad.

Re-enter slowly. If forgotten, reset the lock using the internal button. High-pitched alarm sounding Intrusion or fire sensor trigger

Touch the front screen with your palm to wake it up. Enter your PIN code. Press [*] or touch the screen with your palm again. If you are purchasing this unit, ensure you

Forces user to present Card AND Fingerprint (or Code AND Fingerprint).

Contact your registered RFID card directly to the card icon reader zone. Unlocking from the Inside

The V20 stands out for its compact and unique design, making it a suitable choice for modern homes and offices. It is a handle-less digital lock, contributing to its modern aesthetic.

Located inside the battery cover; used to trigger programming mode.

Touch the registered key tag directly to the card reader icon. Locking and Unlocking from the Inside