Radio Set Hx Prc 6020 Technical Data Install [ RECENT ]

Recommended for long-range or Near Vertical Incidence Skywave (NVIS) communication to bypass terrain obstacles.

Seat the transceiver module onto the designated battery box housing.

(often referred to as the HX PRC-6020 in some regions) is a high-frequency (HF) man-pack radio set designed for reliable voice and data communications in tactical environments. Part of the broader HF-6000 series (Tadiran/Elbit Systems), it is engineered for secure, long-range operations on the modern battlefield. Elbit Systems UK Ltd Technical Specifications

Includes basic "AUTOCALL" (up to 180 tables) and optional advanced ALE.

: Toggleable steps of 5W, 10W, and a maximum of 20W for standard tactical operations. radio set hx prc 6020 technical data install

stems from its high-performance electronic architecture, robust power parameters, and strict adherence to military standards. Core Electrical & RF Performance : 1.5 MHz to 30.0 MHz continuous tuning. Channel Capacity : 100 programmable pre-set channels.

Batteries can be charged via a solar charger (60W peak) or a mains supply charger that supports dual-battery fast charging.

For increased range, a rod antenna up to 5 meters can be used.

Automatic Link Establishment (ALE) and "AUTOCALL" for rapid connection setup. Modulation: Part of the broader HF-6000 series (Tadiran/Elbit Systems),

Features clear and secure (Safe) modes with up to 10 cryptography keys. Installation & Physical Components

Supports voice, telegraph, encoded messages, and data transmission at rates up to 4,800 bps. Receiver Sensitivity: -110 dBm (for 10 dB SINAD). Environmental Durability:

Separate ports for a Whip Connector (tactical rod or tape antennas) and a Dipole Connector (long-wire or stationary high-gain dipole antennas).

: 100 fully programmable channel parameter tables stems from its high-performance electronic architecture

The internal logic requires a backup CR2032 lithium coin cell to retain cryptographic and frequency settings. Ensure this is seated correctly in its dedicated slot. Antenna Deployment

| Symptom | Likely Cause | Fix | |---------|--------------|-----| | No power | Dead battery / blown vehicle fuse | Replace battery; check 15 A fuse | | Low Rx volume | Handset volume low | Adjust knob on handset side | | Cannot Tx | PTT cable defect / high SWR | Check antenna connection; SWR meter | | Programming fails | Wrong COM port | Update driver; use USB 2.0 port | | Overheating in vehicle | Amplifier lacks airflow | Reposition away from engine heat |

: Never touch, lean against, or come within close proximity of the whip antenna while the HX PRC-6020 transmitter is actively keyed or transmitting. Serious RF burns can occur.

Ensure that frequency hopping tables and cryptographic keys are loaded correctly prior to deploying the radio into an active or secure environment.

Lock the structural plates down to create a hermetic seal against dust and water ingress. Step 2: Antenna Configuration