The lights will turn solid green, indicating a successful compass calibration. Gyroscope Calibration Keep the drone on a completely flat, stable surface.
Familiarize yourself with the control layout before launching the aircraft. Basic Joystick Controls Push UP/DOWN to control altitude (climb or descend).
Push the left throttle stick to the top and then pull it all the way down. A beep or solid LED lights usually indicate a successful connection.
Ensure the drone battery and the remote controller are fully charged. A solid light usually indicates a full charge.
"Skyrex" is a model name used across various OEM drone manufacturers. While this guide covers standard procedures for most Skyrex models (including the Skyrex Pro, Skyrex 4K, and Skyrex FPV), always refer to the physical booklet included in your box for model-specific wiring diagrams and regulatory addendums. skyrex drone manual
Before you power on, let’s identify the parts. Your Skyrex box should contain:
Turn on the remote controller. Push the left joystick (throttle) all the way up and then all the way down . You should hear a beep, and the drone's lights will turn solid.
Turn the drone vertically (nose pointing directly at the ground or directly skyward) and rotate it 360 degrees clockwise.
: Use the provided USB charger to charge the drone's lithium battery fully. For the remote control, most SkyRex models require 3 AAA batteries (often sold separately). The lights will turn solid green, indicating a
Select the Wi-Fi network named "Skyrex-XXXX" and connect. No password is required for the initial setup.
Do not fly near airports, crowds, or restricted government buildings. Support Resources
“Signal lost” message appears. Fix: Raise the controller above your head. Yes, it looks silly. Yes, it works.
If the drone drifts left, press the Right Sideward Fine-tuning button. If it drifts forward, press the Backward trim. Basic Joystick Controls Push UP/DOWN to control altitude
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Re-calibrate the gyroscope on a flat surface.
: Power on the remote control first, followed by the drone. The lights on the drone will typically flash rapidly and then turn solid once the frequency match is successful .